a DESIGN EDGE
Select Page

PRODUCTS by model

BMW R nineT

all years: R nineT, Pure, Scrambler, Urban GS, Racer

ADVance Guard R9T

$269

Bundle-R9T

Mudsling + X-Head DOHC

PROTECT your R nineT with the 20% off Product Bundle.

The X-Head DOHC cylinder guard and MudSling™ rear suspension guard protect the damage vulnerable areas of your 2014~2020 R nineT while being beautifully integrated with each of the 4 R nineT models' styling. This Bundle DOES NOT FIT 2021 models.

X-Head DOHC is designed to protect more cylinder head surface area than any other guard in the event of a fall. Even if it gets away from you in the driveway, the inertia will cause the bike to roll onto the face of the cover before the bike settles down on the bottom of the cylinder. Behind the super tough nylon shell is a thick rubber liner that helps absorb impact force against the cylinder. Styling is distinctive while letting just enough of the cylinder head shape to show through.

The MudSling™ R nineT rear suspension guard is designed to look slender and integrated with the minimal styling of the R nineT. It fits all four R nineT models to protect these bikes' wide open rear suspension area from stone chip damage and mud accumulation.

Effective coverage area is 8" wide x 12.5" long to protect the shock while reducing splash out to the sides onto riders' legs. MudSling™ is precision injection molded in resilient polypropylene with a fine texture matching other plastic part surfaces on the R nineT.

MudSling™ fits with the BMW shock, Ohlins BM440 and BM650, and other premium suspension. Installation to the Pure, Scrambler, Urban GS, and Racer models is simple using four screws to existing points on the frame.

Installation to the original R nineT requires an extra step as it is the only model that comes with a shock pre-load adjuster mounted to the OEM shock. Before placing your order, please read important installation information via this link.

 

$314 $251 (Excl. TAX) per set

How many ?

1 XH DOHC

X-Head DOHC

The X-Head DOHC fits all 2010~2012 models plus 2013 GSA, and all R nineT models from 2014~2020.  It does NOT FIT the 2021 R nineT since BMW change the shape of the cylinder head.

X-Head DOHC is designed to protect more of the cylinder head surface than any other guard for these bikes in the event of a fall. Even if it gets away from you in the driveway, the inertia will cause the bike to roll onto the face of the cover before the bike settles down on the bottom of the cylinder. When off-road riding, X-Heads work together with crash bars to prevent damage from rocks that can get past the bars. Behind the tough polymer shell is a thick rubber liner that helps absorb impact force against the cylinder. The thick shell scrapes when dragged along the ground, but it does not break. Included in the kit are stainless steel bolts, washers, & installation instructions

 

 

 

$195 (Excl. TAX) per set

X-Head_DOHC *
How many ?

R9T

MudSling R9T

NOW - 30% OFF

The MudSling™ R nineT rear suspension guard is designed to fit all R nineT models - Classic, Pure, Scrambler, Urban GS, R9T /5 and Racer.

NOTE: Installation to the original "Classic" R nineT with the OEM BMW shock requires an extra step in the process.  Before placing your order, be sure to read this important installation information via this link.

MudSling™ protects these bikes' wide open rear suspension area from stone chip damage, mud accumulation, and reduces rain splash-out. Protect your R nineT from the start. It is designed to look slender and integrated with the minimal styling of the R nineT. Effective coverage area is 8" wide x 12.5" long to protect the shock while reducing splash out to the sides onto riders' legs. MudSling™ is precision injection molded in resilient polypropylene with a fine texture matching other plastic part surfaces on the R nineT.

MudSling™ fits with the BMW shock, Ohlins BM650, and other premium shocks. Some adjustment of the hydraulic spring preload adjuster position may be needed on your model.  Installation is simple using four screws to existing points on the frame.

 

 

On Sale!

$129 $90 (Excl. TAX) per set

How many ?

NOW - 30% OFF

The MudSling™ R nineT rear suspension guard is designed to fit all R nineT models - Classic, Pure, Scrambler, Urban GS, R9T /5 and Racer.

NOTE: Installation to the original "Classic" R nineT with the OEM BMW shock requires an extra step in the process.  Before placing your order, be sure to read this important installation information via this link.

MudSling™ protects these bikes' wide open rear suspension area from stone chip damage, mud accumulation, and reduces rain splash-out. Protect your R nineT from the start. It is designed to look slender and integrated with the minimal styling of the R nineT. Effective coverage area is 8" wide x 12.5" long to protect the shock while reducing splash out to the sides onto riders' legs. MudSling™ is precision injection molded in resilient polypropylene with a fine texture matching other plastic part surfaces on the R nineT.

MudSling™ fits with the BMW shock, Ohlins BM650, and other premium shocks. Some adjustment of the hydraulic spring preload adjuster position may be needed on your model.  Installation is simple using four screws to existing points on the frame.

 

 

On Sale!

$129 $90 (Excl. TAX) per set

How many ?