a DESIGN EDGE for your BMW
Select Page
PRODUCTS by model

OLYMPUS DIGITAL CAMERA

X-Head v.3

X-Head Cylinder Guards are unique in the market -  tough, and wide to protect both the valve and spark plug covers. Molded in an impact modified nylon polymer, v.3 is upgraded with higher heat & chemical resistance. X-Heads protect a broad area & are the best looking solution available.

Included are stainless steel bolts with Nyloc threadlock patches so they stay tight. They fit with the following crash bars: BMW OEM; Adventure Designs crash bar extensions; Touratech; Hepco Becker; SW Motech, and Heed. Does not fit Z-Tecknik. If your bars fit BMW's OEM cylinder guards, they will fit with X-Head. If your crash bars have had an impact, check that you have a minimum of 15mm clearance between the closest part of the left side valve cover and the inside of the crash bar to assure a good fit.

$189.00 (Excl. TAX) per set

How many ?

2 Avant R1200 RT

Avant RT

  • EASY, NO DRILL INSTALLATION!
  • ADDS 5.5" IN LENGTH
  • WIDE, BUT LOOKS SLIM

NOW 30% off. The AVANT fender extension for the R1200RT INSTALLS in 5 minutes WITHOUT DRILLING holes, adding width and 5.5" of extra length.  The design helps control mud, tar, & rock splash back onto your headers, crossover pipe and engine keeping them looking new longer and reducing maintenance.

This patented design installs with three self-locking screw clamps that grip the fender underside for a secure fit. The shape provides wide coverage but does not look as wide as it is. Wide coverage is the key to effective function.

Molded in resilient polypropylene, it is designed to complement the look of the stock fender and the bold design of the RT.

$79.00 $55.30 (Excl. TAX) per set

How many ?

X-Head Cylinder Guards are unique in the market -  tough, and wide to protect both the valve and spark plug covers. Molded in an impact modified nylon polymer, v.3 is upgraded with higher heat & chemical resistance. X-Heads protect a broad area & are the best looking solution available.

Included are stainless steel bolts with Nyloc threadlock patches so they stay tight. They fit with the following crash bars: BMW OEM; Adventure Designs crash bar extensions; Touratech; Hepco Becker; SW Motech, and Heed. Does not fit Z-Tecknik. If your bars fit BMW's OEM cylinder guards, they will fit with X-Head. If your crash bars have had an impact, check that you have a minimum of 15mm clearance between the closest part of the left side valve cover and the inside of the crash bar to assure a good fit.

$189.00 (Excl. TAX) per set

How many ?