a DESIGN EDGE
Select Page

PRODUCTS by model

AvantGuard

AvantGuard R/RS

Avant R/RS_LC is a new kind of front end protection guard for the R1200 R/RS designed to shield the painted engine, exhaust headers and surrounding surfaces from stone and splash abrasion damage over time.

The R and RS models' front fenders are very short, styled to look light and fast, but ineffective in containing road debris thrown back by the front tire. The front fenders are also very flexible - not stable enough to serve as a proper mount for a long fender extension. Avant R/RS solves the problem by mounting to the engine/chassis behind the front fender.

Avant R/RS covers the full height of the engine, 12.5" (325mm), mounting to two existing screws at the top, and to the bottom of the engine case via an aluminum bracket and M8 bolts. At its widest point, 11.5" (295mm) it partially overlaps the exhaust headers to reduce stone abrasion.

NOTE: LED Driving Lights from BMW, or aftermarket brands like Clearwater can be mounted with Avant R/RS using the MaMo Light Bar kit. MaMo Light Bars are individual left and right sides that bolt to the frame and are satin finish powder coated steel.

BMW's one piece light bracket part #77 51 8 551 341 is not compatible with the Avant R/RS. MaMo Light Bars are $79.00, 50% the cost of BMW's bracket.

***At present, MaMo Light Bars fit with X-Head_LC cylinder guards but do not fit with BMW's OE crash bars.  We will have crash bar compatible Light Bars in early to mid-November 2016.

Avant R/RS is injection molded 3mm thick nylon, the same tough, impact resistant material used by BMW for many of its parts. It has a fine matte black texture and its shape reflects the form of the engine and the R/RS's bodywork.

 

 

 

On Sale!

$129.00 $89.00 (Excl. TAX) per set

How many ?

AvantGuard

MaMo Light Bars

MaMo Light Bars enable fitting the AvantGuard engine protection shield to the R1200 R/RS along with LED driving lights, either those from BMW or aftermarket brands such as Clearwater, whose Darla model is shown here. Mamo Light Bars are a lower cost alternative to BMW's light bracket and can be used with or without the AvantGuard.

MaMo Light Bars are individual left and right sides finished in satin black powder coated steel and mount directly to the frame in the same location as BMW's bar. They enable both the benefit of improved LED driving light illumination and the protective benefit of the AvantGuard. Mounting hardware is included.

Fit Compatibility: MaMo Light Bars fit with sufficient clearance to X-Head cylinder guards, BMW crash bars, SW Motech crashbars, and Wunderlich 26440-202 crashbars.

 

 

 

$79.00 (Excl. TAX) per set

How many ?

X-Head 1250

MaMo R12R-RS MudSling 192x154

MudSling™ R/RS

The new MudSling R1200 R/RS_LC is designed to protect these bikes' wide open suspension area and assorted underseat components from stone chip damage and mud accumulation. Protect your brand new ride from the start.

MudSling's effective coverage area is 8.5" wide x 16", protecting the Paralever arm, shock absorber, and electronics module, while reducing splash out to the sides onto riders' legs. It provides broad area coverage while looking slender from the side and well integrated with the R/RS bikes' styling.

MudSling™ is precision injection molded in resilient polypropylene with a fine texture matching other plastic part surfaces on the R/RS. It mounts with one screw to a frame component and is further secured to the frame rails with nylon zip ties. See the installation video link below to see how easy it is to install.

In stock!

$129.00 (Excl. TAX) per set

How many ?

AVG MS Bundle

Bundles

 

15% Off

 

Avant R/RS_LC is a new kind of front end protection guard for the R1200 R/RS designed to shield the painted engine, exhaust headers and surrounding surfaces from stone and splash abrasion damage over time.

The R and RS models' front fenders are very short, styled to look light and fast, but ineffective in containing road debris thrown back by the front tire. The front fenders are also very flexible - not stable enough to serve as a proper mount for a long fender extension. Avant R/RS solves the problem by mounting to the engine/chassis behind the front fender.

Avant R/RS covers the full height of the engine, 12.5" (325mm), mounting to two existing screws at the top, and to the bottom of the engine case via an aluminum bracket and M8 bolts. At its widest point, 11.5" (295mm) it partially overlaps the exhaust headers to reduce stone abrasion.

NOTE: LED Driving Lights from BMW, or aftermarket brands like Clearwater can be mounted with Avant R/RS using the MaMo Light Bar kit. MaMo Light Bars are individual left and right sides that bolt to the frame and are satin finish powder coated steel.

BMW's one piece light bracket part #77 51 8 551 341 is not compatible with the Avant R/RS. MaMo Light Bars are $79.00, 50% the cost of BMW's bracket.

***At present, MaMo Light Bars fit with X-Head_LC cylinder guards but do not fit with BMW's OE crash bars.  We will have crash bar compatible Light Bars in early to mid-November 2016.

Avant R/RS is injection molded 3mm thick nylon, the same tough, impact resistant material used by BMW for many of its parts. It has a fine matte black texture and its shape reflects the form of the engine and the R/RS's bodywork.

 

 

 

On Sale!

$129.00 $89.00 (Excl. TAX) per set

How many ?