a DESIGN EDGE
Select Page

PRODUCTS by model

BMW R1200R; R1200RS

AvantGuard

AvantGuard R/RS

Special Price!

Avant Guard R/RS_LC is a new kind of front end protection guard for the R1200 R/RS designed to shield the painted engine, exhaust headers and surrounding surfaces from stone and splash abrasion damage over time.

NOTE: Avant Guard R/RS also fits the new R1250 R/RS, but requires removal of the lower front fairing winglets. Both the Avant Guard and the lower fairing cannot be mounted together.

The R and RS models' front fenders are very short, styled to look light and fast, but are ineffective in containing road debris thrown back by the front tire. Avant Guard R/RS solves the problem by mounting to the engine/chassis behind the front fender.

Avant Guard R/RS covers the full height of the engine, 12.5" (325mm), mounting to two existing screws at the top, and to the bottom of the engine case via an aluminum bracket and M8 bolts. At its widest point, 11.5" (295mm) it partially overlaps the exhaust headers to reduce stone abrasion.

NOTE: LED Driving Lights from BMW, or aftermarket brands like Clearwater can be mounted with Avant Guard R/RS using the MaMo Light Bar kit. MaMo Light Bars are individual left and right sides that bolt to the frame and are satin finish powder coated steel.

BMW's one piece light bracket part #77 51 8 551 341 is not compatible with the Avant Guard R/RS. MaMo Light Bars are $79.00, 50% the cost of BMW's bracket.

Avant Guard R/RS is injection molded 3mm thick nylon, the same tough, impact resistant material used by BMW for many of its parts. It has a fine matte black texture and its shape reflects the form of the engine and the R/RS's bodywork.

 

 

 

$89.00 (Excl. TAX) per set

How many ?

AvantGuard

MaMo Light Bars

MaMo Light Bars enable fitting LED driving lights from either BMW or Clearwater's Darla -shown here- to the 2015~2018 R1200 R/RS or 2019~2020 1250 R/RS.  MaMo Light Bars fit easily with the AvantGuard engine protector and are a lower cost alternative to BMW's light bracket.

MaMo Light Bars are individual left and right sides finished in satin black powder coated steel and mount directly to the frame in the same location as BMW's bar. They enable both the benefit of improved LED driving light illumination and the protective benefit of the AvantGuard. Mounting hardware is included.

Fit Compatibility: MaMo Light Bars fit with sufficient clearance to X-Head cylinder guards, BMW crash bars, SW Motech crashbars, and Wunderlich 26440-202 crashbars.

 

 

 

$79.00 (Excl. TAX) per set

How many ?

XH R and RS_LC 155x124 x2

X-Head_LC

X-Head_LC cylinder guards for 2013~2018 R1200 Liquid Cooled models.

The X-Head_LC design benefits from Tough Polymer technology successfully proven in use with the X-Head DOHC and SOHC models. With its blend of high impact strength, temperature and UV stabilization, the injection molded shell is designed to be slightly ductile in impact to prevent breakage. On the inside of the shell is a thermoplastic rubber liner that rests against the face of the cylinder to aid in dissipating impact force while preventing hard contact. Each side mounts via 2 stainless steel M5 T25 Torx Head fasteners and one T50 bolt.

X-Head_LC cover 80% of the face of the head to protect not only the bottom/front initial impact area, but also the mid part of the cylinder head. Even in a stationary drop, inertia can cause a bike to roll partially onto the face of the head before it settles down.

X-Head_LC are styled to complement the Liquid-Cooled models & are the best choice for riders who do not like the look of crash bars, especially on an RT, R, and RS.

For GS off-road riding, X-Head_LC fits with crash bars to fill the gaps between the bars protecting heads from rocks and strike angles onto terrain that can get past the bars.

X-Heads do not fit with Hepco & Becker crash bars. X-Heads have been successfully fitted with crash bars made by BMW, and Alt Rider. NOTE:  Fit and compatibility of BMW or aftermarket brands of crash bars with X-Heads may vary, depending on their manufacturing size accuracy and any running changes the manufacturers may make over time. SW Motech bars fit properly on the right side but clearance is less on the left side because of manufacturing tolerance differences side to side.

Installation with crash bars: To install X-Heads on R1200 GS/A already fitted with crash bars, they will have to be removed to provide enough working room for X-Head installation.  It is recommended that removal and re-fitting be done by a qualified BMW technician if there is any concern about the procedure.

$195.00 (Excl. TAX) per set

X-Head_LC *
How many ?

MaMo R12R-RS MudSling 192x154

MudSling™ R/RS

The new MudSling R12 R/RS_LC for R1200 / R1250 models is designed to protect these bikes' wide open suspension area and assorted under seat components from stone chip damage and mud accumulation. Protect your brand new ride from the start.

MudSling's effective coverage area is 8.5" wide x 16", protecting the Paralever arm, shock absorber, and electronics module, while reducing splash out to the sides onto riders' legs. It provides broad area coverage while looking slender from the side and well integrated with the R/RS bikes' styling.

MudSling™ is precision injection molded in resilient polypropylene with a fine texture matching other plastic part surfaces on the R/RS. It mounts with one screw to a frame component and is further secured to the frame rails with nylon zip ties. See the installation video link below to see how easy it is to install.

In stock!

On Sale!

$119.00 $109.00 (Excl. TAX) per set

How many ?

AVG MS Bundle

Bundles

 

15% Off

 

COVER BOTH ENDS of your liquid-cooled R/RS for 15% less. Select from 3 options below.

The Avant R/RS front engine guard and MudSling rear suspension guard Double Bundle for the R1200 R/RS_LC are a matched set designed to protect vulnerable surrounding surfaces from stone abrasion, tar, and mud accumulation. If you plan to install LED driving lights from BMW, Clearwater or other brands, order the Avant R/RS and Light Bar Bundle, or the Triple Bundle which includes all three products - Avant R/RS, MudSling, and Light Bars to increase your savings.

Avant R/RS is a new kind of front end guard for the R1200 R/RS designed to shield the painted engine, exhaust headers and surrounding surfaces from stone and splash abrasion damage over time. Avant R/RS mounts to the engine/chassis behind the front fender. It covers the full height of the engine, 12.5" (325mm), mounting to two existing screws at the top, and to the bottom of the engine case via an aluminum bracket and M8 bolts. At its widest point, 11.5" (295mm) it partially overlaps the exhaust headers to reduce stone abrasion and leaves sufficient clearance for cooling airflow.

MudSling’s™ effective coverage area is 8.5" wide x 16", protecting the Paralever arm, rear shock absorber, and electronics module, while reducing splash out to the sides onto riders' legs. MudSling provides broad area coverage while looking slender from the side and is well integrated with the R/RS bikes' styling.

MaMo Light Bars enable fitting the Avant R/RS engine protection shield to the R1200 R/RS together with LED driving lights, either those from BMW or aftermarket brands such as Clearwater, whose Darla model is shown here. MaMo Light Bars are individual left and right sides finished in satin black powder coated steel and mount in the same location as BMW's bar. They enable both the benefit of improved LED driving light illumination and the protective benefit of the Avant R/RS. Mounting hardware is included.

$185.00 (Excl. TAX) per set

Bundle Discounts *
How many ?