MudSling™ GS_LC rear suspension guard protects the rear shock and surrounding surfaces from stone damage, mud and tar accumulation. MudSling™ mounts to the existing short inner fender and to the sides of the frame and in between the rear tire and suspension, increasing the surface width to each side up to 3" and downwards 7" for a total of 200% more coverage area than stock.
MudSling™ fits BMW 2013~23 R1200/1250GS & 2014~23 R1200/1250GSA models. It is injection molded in resilient polypropylene with a fine texture matching other molded surfaces on the GS. It is shaped to engage the bottom of the existing fender and fits tightly against the frame where it is secured. Installation takes less than 5 minutes.
MudSling™ fits with BMW stock pannier mounts for both the GS and ADV, as well as Touratech Zega Pro and SW Motech. It does not fit with Hepco Becker, and Jesse Odessey II mounts.
MudSling_LC fits best with the standard fitment street biased tires on both the R1200/1250 GS and GSA: Metzler Tourance Next, Michelin Anakee, Bridgestone Battlax Adventure A41R and Pirelli Rallye STR. There are a limited number of knobby tires that fit, depending on whether mounted to a GS or GSA. This is due to differences in tire cross-section shapes and diameters as there is not much clearance between the rear tire and the Paralever on the GSA. Refer to the following basic guide for knobby fit with MudSling:
Knobbies that FIT GS: Michelin Anakee Wild; Continental TKC80; Mitas E-07 NOT FIT GS: Shinko 805; Hidenau 60 Scout.
Knobbies that FIT GSA: Michelin Anakee Wild: NOT FIT GSA: Continental TKC-70; TKC-80; Mitas E-07; Shinko 805; Hidenau 60 Scout. Tire fit is subject to variables that may affect your actual installation.
MudSling™GS continues the tradition of enhanced functionality, attention to detail, and quality appearance.
- MudSling_GSLC: 2013~23 R1200/1250 GS; 14~23 R1200/1250 GSA